Bob Long Parts Archives - PB Mechanix - Ninja Paintball Tanks, Ninja SL Tanks, PCP Air Rifle Regulators, PCP Air Rifle Tanks for sale.

Bob Long Gen 2 / Gen 3 Body Puncture Repair Kit

Gabe Fletcher — Wed, 09 Aug 2017 17:10:20 +0000

These are machined from stainless steel, custom made for PB Mechanix, they are not cheap aluminum that will strip out.

Whats Included.
1 PB Mechanix Plug Insert
1 Plug-to-Body O-ring
1 10/32 Shortened Frame Screw

NOTE: DO NOT USE THE STOCK FRAME SCREW SIZE, AS IT WILL BOTTOM OUT INSIDE THE PLUG AND RUIN THE PLUG, USE ONLY THE SHORTENED SIZE PROVIDED.

DIRECTIONS
1. Remove frame and hoses from your Bob Long Intimidator.
2. Be sure that your front frame screw body hole is clean.
3. Apply small amount of DOW55 to Oring on plug.
4. Apply a drop of RED LOC TITE to the MALE THREADS of the Plug.
5. Screw the plug in to the front frame screw hole by hand until tight.
6. Using a crescent wrench or appropriate socket wrench, run the plug in until it is very snug
(DO NOT OVER TIGHTEN OR YOU WILL STRIP THE BODY HOLE OUT)
7. Allow Loctite to Dry and Cure for 24 hours BEFORE airing up the marker to check for leaks.
(Use a heat gun & apply heat to front frame hole area to speed curing process)
8. Air up your marker to test for leaks.

The post Bob Long Gen 2 / Gen 3 Body Puncture Repair Kit appeared first on PB Mechanix - Ninja Paintball Tanks, Ninja SL Tanks, PCP Air Rifle Regulators, PCP Air Rifle Tanks for sale..

Bob Long Gear Drive Xpress Mount ASA – GLOSS BLACK

Gabe Fletcher — Fri, 02 Dec 2016 18:11:01 +0000

The Bob Long Gear Drive Xpress Mount On/Off ASA is a high performance hard part perfect for your marker. The Gear Drive Xpress Mount ASA quickly attaches to most marker grip frames. The front oriented fitting allows a smooth, low profile pressure outlet with a thumb wheel on/ off knob and bleed.

Gear Drive – Gear reduction makes this the easiest asa to turn on and off.
Xpress Mount – Our new mounting system.
Line Bleed – After turning the system off, the asa will bleed any air from the lines.

The post Bob Long Gear Drive Xpress Mount ASA – GLOSS BLACK appeared first on PB Mechanix - Ninja Paintball Tanks, Ninja SL Tanks, PCP Air Rifle Regulators, PCP Air Rifle Tanks for sale..

Bob Long Gear Drive Xpress Mount ASA – DUST BLACK

Gabe Fletcher — Fri, 02 Dec 2016 18:05:46 +0000

Gear Drive – Gear reduction makes this the easiest asa to turn on and off.
Xpress Mount – Our new mounting system.
Line Bleed – After turning the system off, the asa will bleed any air from the lines.

The post Bob Long Gear Drive Xpress Mount ASA – DUST BLACK appeared first on PB Mechanix - Ninja Paintball Tanks, Ninja SL Tanks, PCP Air Rifle Regulators, PCP Air Rifle Tanks for sale..

Reflex Engine Upgrade for Insight/Phase/Victus – PICK YOUR COLOR

Gabe Fletcher — Fri, 02 Dec 2016 03:58:50 +0000

The brand new Insight Reflex engine gives your Insight, Phase or Victus our latest and greatest spool engine. This engine eliminates problems with bolt stick, while also giving you a softer shot, and more consistency over the chrono. It features a rear spring recoil reducer along a new brass shut off with an extra o-ring to eliminate bolt stick. There is a fully redesigned ram and ram housing as well as an-easy-on-paint pillow face bolt.

This product will not work with the Onslaught.

The post Reflex Engine Upgrade for Insight/Phase/Victus – PICK YOUR COLOR appeared first on PB Mechanix - Ninja Paintball Tanks, Ninja SL Tanks, PCP Air Rifle Regulators, PCP Air Rifle Tanks for sale..

Bob Long Intimidator Main Harness (Fits Alias & 06 Style – Gen3/4)

Gabe Fletcher — Sun, 20 Nov 2016 09:08:37 +0000

OEM quality replacement. This main harness powers all Gen 3 and 4 Intimidators as well as any older model that has been upgraded to use Alias based electronics.

This replacement uses an “I” connector that allows the wiring to sit flatter than the factory “T” connector. This makes it much easier to get the wiring in place; to close the clamshell half of the frame; and to avoid pinching wires in the clamshell.

The post Bob Long Intimidator Main Harness (Fits Alias & 06 Style – Gen3/4) appeared first on PB Mechanix - Ninja Paintball Tanks, Ninja SL Tanks, PCP Air Rifle Regulators, PCP Air Rifle Tanks for sale..

Bob Long Intimidator Anti-Chop Eyes. (Fits Alias & 06 Style – Gen3/4)

Gabe Fletcher — Sun, 20 Nov 2016 09:08:12 +0000

OEM quality replacement eyes for the Gen 4 Bob Long Intimidator and the Defiant 2. These can also be used to upgrade an Alias (Gen 3) based gun or a previous model that has been upgraded to use Alias electronics. This eye set is a complete replacement for the two piece eye set AND eye harness used in the Gen 3 intimidators.

The post Bob Long Intimidator Anti-Chop Eyes. (Fits Alias & 06 Style – Gen3/4) appeared first on PB Mechanix - Ninja Paintball Tanks, Ninja SL Tanks, PCP Air Rifle Regulators, PCP Air Rifle Tanks for sale..

Bob Long Vice / Protege Gen 5 Pillow Bolts

Gabe Fletcher — Sun, 20 Nov 2016 05:31:47 +0000

For the Bob Long Vice / Protege markers. They have the factory Pillows installed in to the face. These bolts will never ever be made again by Bob Long. This is the last of them you will find new.

The post Bob Long Vice / Protege Gen 5 Pillow Bolts appeared first on PB Mechanix - Ninja Paintball Tanks, Ninja SL Tanks, PCP Air Rifle Regulators, PCP Air Rifle Tanks for sale..

Bob Long Victory / VIS Solenoid

Gabe Fletcher — Sun, 20 Nov 2016 05:25:22 +0000

OEM Replacement Solenoid For your Bob Long Victory / VIS.

The post Bob Long Victory / VIS Solenoid appeared first on PB Mechanix - Ninja Paintball Tanks, Ninja SL Tanks, PCP Air Rifle Regulators, PCP Air Rifle Tanks for sale..

Bob Long G6R Intimidator Solenoid (Gen 6)

Gabe Fletcher — Sun, 20 Nov 2016 05:21:48 +0000

OEM Replacement Solenoid For your Bob Long G6R Intimidator.

The post Bob Long G6R Intimidator Solenoid (Gen 6) appeared first on PB Mechanix - Ninja Paintball Tanks, Ninja SL Tanks, PCP Air Rifle Regulators, PCP Air Rifle Tanks for sale..

Bob Long Vice / Protege Intimidator Solenoid (Gen 5)

Gabe Fletcher — Sun, 20 Nov 2016 05:11:45 +0000

OEM Replacement Solenoid For your Bob Long Vice / Protege Intimidator.

The post Bob Long Vice / Protege Intimidator Solenoid (Gen 5) appeared first on PB Mechanix - Ninja Paintball Tanks, Ninja SL Tanks, PCP Air Rifle Regulators, PCP Air Rifle Tanks for sale..